PRODUCTS

MAX-10-C

	Core drill rig
	Carrier: Track or trailer mounting
	Drilling techniques: Diamond core
	Drilling applications: Mining exploration

	Feature
		Fits in 20ft high cube container Lightweight and powerful The best international components Short delivery time
	Standard equipment on a MAX-10-C
	Powerful Cummins Tier II 177 HP diesel engine; Sauer Danfoss hydraulic piston pumps; Maxidrill rotation drill head with built-in 2 speed transmission; Direct feed cylinder with 11,5 ft (3.5 m) stroke; Drill mast 29,5 ft long (9 m) in full extension; High capacity wire-line hoist with automatic reel; Braden main winch 15 000 lb (6 800 kg) capacity; Hydraulic oil cooler; Mud mixer with independent hydraulic pump and mud mixing tub; High pressure water pump Bean 435 type with water tub Hydraulic rod holder Wedge Type
	MAX-10-C's console design gives the operator complete control on all drill functions including engine and water pressure pump.

SPECIFICATIONS

Drilling Capacity
Rod Size	Depth
BQ NQ HQ PQ	1,300 m 1,000 m 700 m 400 m
Track
Track Pad Width Max Up Hill Angle Haul Capacity Speed	400 mm 30 degrees 11 tons 2 km/hr.
Power Unit
Model Displacement Power (177 bhp) Cooling Type	Cummins 6BTA, 6cyl.Tier II 5.9 L. 132KW/2500rpm Water Turbo charged, after cooling
Hydraulic System
Working Pressure Cooling	26Mpa (3,750 psi) Air cooled
Drill Head (Side sliding)
Max Torque Gear Box Inside Diameter	8,135NM (6 000ft/lb) 2 speed built-in transmission PQ size
Ratio
Spindle Speed 1st 2nd	RPM* 0 – 200 0 – 1200 * Depending of hyd. motor size and internal gear ratio
Drill head chuck
Chuck Max opening Optional Model	Spring closed, hydraulic Open PQ size Christensen, & Longyear
Main winch
Max Pull Pulling Speed	6,800 kg. bare drum (15,000 lbs.) 51m/min (167ft./min) Rope size/Length 6mm/30m (5/8’’X100ft)
Wireline Winch with reel
Power Max Pull Pulling Speed Rope size/Length	Hydraulic system 1,100kg. bare drum (2,400lbs.) 120m/min bare drum (430ft./min) 6.6mm/1,300m (¼’’/4,265ft.)
Mast
2 sections, with mast dump Length/Feed Travel Drilling Angle Max Push Max Pull Mast Dump	9m/ (29.5ft) 3.5m (11.5ft) 45 to 90 degrees 5,500Kg (12,000 lbs.) 12,000Kg (26,400 lbs.) 1,4m ( 4,6ft.)
Foot Clamp
Model Max Rod Size	Wedge type 117mm ( 4 5/8’’)
Drill total weight	10,000kg (22,000 lbs.)
Drill Size	5,382 x 2,300 x 2,600m (17,6’ x 7,54’ X 8,5’)

Specifications can be adapted to client's needs on request (Weight and dimension are subject to change without notice)

PRODUCTS

MAX-10-C

Core drill rig

Feature

Standard equipment on a MAX-10-C

SPECIFICATIONS